One of our most asked questions is "how do you assemble the clutch release bearing?" and with a good few parts which are all different...

Now this isn’t a how to but more of a guide to get your new knuckle/hub joints installed. The rear rose joints are pretty common to fail...

The following is a guide for installing our Vvti bov delete kit, if you are unsure we recommend using a trained professional for the...

Our cop 1Jz vvti conversion kit is now available through the website; as promised, this is the installation guide. The installation...

Our rack spacer kit is very simple to install with basic tools. The kit provides a little extra lock for a tighter turning circle or...

Removing the fuel pump The lower part of the rear bench needs removing, simply pull up from the front edge where the clips are on the...