Pulsar PTX3076R Gen 2
- Please note, T51R housing option requires an extra 7 days handling time
- Recommended displacement 1.8 to 3.0 litres with power outputs up to 700hp possible.
- Dual Ceramic Ball Bearing System
- 9 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology
- Inconel 713c 10 Blade Turbine Wheel
- Gen2 Cover Integrated with the Speed Sensor Port
- 0.83 A/R dual v-band turbine housing, T3 0.63, 0.82 V-Band outlet turbine housing In option
- V-Band Flange kit(s) for the exhaust housing included
- Max Air Flow rate: 65 lb/min, rated @ 750 FWHP
- Supplied with manifold to turbine gasket and 5 bolt gasket (where applicable). Oil feed restrictor supplied (where applicable).
- Wastegate actuator supplied on internally gated units with compressor housing.
SPEC
- Compressor Wheel: 58*76mm
- Turbine Wheel: 60*55mm
- Compressor Inlet: 4″ Hose
- Compressor Outlet: 2″ Hose
- Turbine Inlet: T3, T4 or 2″ V-Band
- Turbine Outlet: 3″ V-Band(3.55″OD)
- Oil Feed: -4 AN Oil Restrictor connection.
- Oil Drain: Std T3 Flange
- Water In/Outlet: M14*1.5
It's strongly recommended to run water cooling to aid reliability.
*Pictures are for illustrative purposes please use the drop down options for your specific fitment options
Pulsar PTX3076R Gen 2 Turbo
PriceFrom £510.60
Kuruma Factory keeps many items on the shelf, we also recieve stock orders weekly from the Uk, Europe and Japan. Our items are a mixture of stocked parts and special orders.
Items stocked are usually dispatched the same day if ordered before 3.30pm. Regards out of stock and special order items an email will be sent with estimated leadtimes at point of ordering.
If your order is time sensative please by all means contact us before placing your order so we can advise to make sure any timescales are suitable.